This avoids vswprintf failures when printing non-ASCII char* strings
from CLogger into the console.
Also convert ScriptInterface::ToString to return UTF-8, to avoid some
utf8_from_wstring calls.
Also remove some unused and redundant CConsole functions.
This was SVN commit r16333.
This fixes the problem where passing a non-ASCII string to
debug_printf(L"%hs", s) caused vswprintf_s to fail on Linux (because it
doesn't know what encoding the char* is meant to have). Now debug
messages will remain as UTF-8 until they reach the OS.
Fixes#3021.
This was SVN commit r16332.
I've reverted this workaround before the SM31 commit because I thought
it's only a problem with VS2010. Actually VS2013 still doesn't support
C++11 well enough and still requires the workaround.
Refs #2669, #2462
This was SVN commit r16215.
This upgrade also introduces exact stack rooting (see to the wiki:
JSRootingGuide) and fixes problems with moving GC. This allows us to
enable generational garbage collection (GGC).
Measurements a few months ago have shown a performance improvement of a
non-visual replay of around 13.5%. This probably varies quite a bit, but
it should be somewhere between 5-20%. Memory usage has also been
improved. Check the forum thread for details.
Thanks to everyone from the team who helped with this directly or
indirectly (review, finding and fixing issues, the required C++11
upgrade, the new autobuilder etc.)! Also thanks to the SpiderMonkey
developers who helped on the #jsapi channel or elsewhere!
Fixes#2462, #2415, #2428, #2684, #1374
Refs #2973, #2669
This was SVN commit r16214.
Everything is char* now, so we don't need to mess around with different
string types.
Done with:
ag -ls 'LOG(MESSAGE|MESSAGERENDER|WARNING|ERROR)' source | xargs perl
-pi -e'1 while
s/(LOG(MESSAGE|MESSAGERENDER|WARNING|ERROR).*)%[hl]s/$1%s/g'
This was SVN commit r16187.
Done with:
ag -ls 'LOG(MESSAGE|MESSAGERENDER|WARNING|ERROR)' source | xargs sed
-i 's/LOG\(MESSAGE\|MESSAGERENDER\|WARNING\|ERROR\)(L/LOG\1(/g'
This was SVN commit r16183.
sys_vswprintf relies on platform-specific printf implementations, which
vary widely between platforms (in handling of truncation, return values,
use of %s/%S/%hs/%ls for mixing char and wchar_t strings, etc) and are
therefore a pain.
Use cppformat's fmt::sprintf instead, which has very similar syntax to
sprintf but is more C++ish and is portable.
Also, wchar_t is stupid, so use char* strings (which are expected to be
UTF-8) in CLogger. This creates a bit of a pain with changing all
callers to convert to char* strings, but that's their fault for not
using UTF-8 already.
Refs #3011.
This was SVN commit r16182.
The runtime is becoming more and more important in the JSAPI. As a
result, we also have more functionality on the runtime level and having
the whole ScriptRuntime class hidden in ScriptInterface.cpp doesn't make
sense anymore. ScriptInterface.cpp also has become quite a large file
and pulling out the runtime part makes it a bit smaller.
Refs #2462
This was SVN commit r15961.
Fix Engine.ReadJSONFile() which did throw a JS exception that was not
caught. Discovered by s0600204.
Expose Engine.ReadJSONFile() to the gui scripts.
This was SVN commit r15959.
It seems like there is a memory leak if we haven't finished with the
marking phase of an incremental GC and SpiderMonkey has to trigger a
full GC because it runs out of memory. With this patch we stop trying to
make incremental GCs if we are above 1/2 of the runtime size and do Full
GCs instead. This should make such low memory conditions even less
likely than they were already after the previous patch. Also reduce the
maximum VFS cache size to 400 MB.
Refs #2808
This was SVN commit r15831.
The main problem was that GC was only called from the simulation before
this patch. This means when you were waiting in the multiplayer lobby or
just had the GUI open, it only called GC when getting close to the JS
runtime size limit (I assume). Another problem was the Net Server
runtime which didn't GC either. Here the runtime size limit is 16 MB
though, so it's not too terrible. These issues have both been addressed
and GC has been given a bit more time per incremental slice to make sure
it gets done in time. It's still far from perfect, but there are too
many changes in SpiderMonkey related to GC, so I don't want to spend too
much time on this yet.
Refs #2808
This was SVN commit r15787.
Copying a ScriptInterface is not allowed. The destructor destroys the
JSContext and if there's a copy around that still uses it, that causes
crashes which can be quite hard to debug. This change prevents copying
by of ScriptInterface objects by making the copy constructor private,
which will reveal such errors at compile time.
This was SVN commit r15625.
I had to change a few other functions to take JS::MutableHandleValue
because JS::Stringify takes a JS::MutableHandleValue as input parameter.
That seems a bit strange because it should not change that value.
I assume it has historical reasons.
Refs #2415
Refs #2462
This was SVN commit r15605.
It might actually be needed again in the future, but I think even then
it would be easier to rewrite it than having to update the code in the
meantime.
Refs #2462
This was SVN commit r15600.
Changes CallFunction and CallFunctionVoid to use a HandleValue as object
parameter. Also changes some JS serialization/deserialization functions
to only support the JSAPI rooted types (drop support for CScriptVal and
CScriptValRooted there). Some other functions got changed too because
they were closely related.
Refs #2415
Refs #2462
This was SVN commit r15592.
Changes GetProperty, SetProperty and HasProperty and a few other
functions to take handles. The conversions to CScriptVal or
CScriptValRooted at some places should be removed in the future. I've
done that to avoid an even larger patch.
Refs #2415
Refs #2462
This was SVN commit r15568.
* Adds additional overloads/specializations which are required when
passing JS::Handle<T>/JS::MutableHandle<T> types to different functions.
* Replaces GetPropertyJS with a GetProperty specialization.
* Allows us to avoid the implementation of ToJSVal specializations for
JS::Value and JS::HandleValue. Such conversions should only happen if
there's no way around it and if you are aware of it.
* Adds test to make sure that all potentially required specializations
with custom implementations are instantiated. This should help prevent
introducing bugs in temporarily unused code.
Refs #2415
This was SVN commit r15567.
Rooting works different now and the CScriptVal types are going to be
removed. We will need rooting tests again, but they will have to work
completely different than this test implementation.
Refs #2415
This was SVN commit r15562.
Also includes one little "demo-usecase", but additional code will be
changed to use that in future commits.
Refs #2415
Refs #2462
This was SVN commit r15542.
Changes the CallFunction implementation to use macros because otherwise
we'd have to write twice as many functions manually.
Adapts GetSavedGameData to use the new function template. Additional
callers will be changed in future commits.
Refs #2415
Refs #2462
This was SVN commit r15541.
JS::MutableHandleValue is similar to JS::HandleValue, but the whole
JS::Value it points to can be replaced.
This change is needed for support of exact stack rooting and moving GC.
Contains a few other trivial API adjustments and style improvements too.
Refs #2462
Refs #2415
This was SVN commit r15534.
In v24 you called JS_InitClass and passed in a definition of JSNative
functions. Later you could call JS_NewObject with this class and the
object would get a prototype with the specified JSNative functions.
In ESR31 you now have to explicitly store the prototype object returned
by JS_InitClass and pass it as prototype argument to JS_NewObject to
achieve the same.
This change modifies our existing ScriptInterface implementation for
custom object types a bit and uses it at places where the JSAPI was used
directly before.
Refs #2462
This was SVN commit r15524.
JS::HandleValue is basically a wrapper around a JS::Value that is safe
for exact stack rooting and moving GC.
I've tried to keep this changeset rather small and isolated and
therefore create additional JS::Rooted<T> values at some places where
the function should eventually directly take a JS::Handle<T>.
The functions "CallFunction" and "CallFunctionVoid" put their arguments
inside a JS::AutoValueVector because this will be passed directly to
"CallFunction_" with ESR31.
Refs #2462
Refs #2415
This was SVN commit r15517.
