Properly write config settings with multiple values back to files. Refs
#1810.
Print error messages if we encountered an invalid setting.
This was SVN commit r15980.
Fix Engine.ReadJSONFile() which did throw a JS exception that was not
caught. Discovered by s0600204.
Expose Engine.ReadJSONFile() to the gui scripts.
This was SVN commit r15959.
This first commit only refactors code and does not add any new feature.
Refs #2913 (see this ticket for more information about the change)
This was SVN commit r15925.
It seems like there is a memory leak if we haven't finished with the
marking phase of an incremental GC and SpiderMonkey has to trigger a
full GC because it runs out of memory. With this patch we stop trying to
make incremental GCs if we are above 1/2 of the runtime size and do Full
GCs instead. This should make such low memory conditions even less
likely than they were already after the previous patch. Also reduce the
maximum VFS cache size to 400 MB.
Refs #2808
This was SVN commit r15831.
* SDL_WINDOW_RESIZABLE must be set when creating the window, apparently
only fullscreen flags take effect in SDL_SetWindowFullscreen
* Stores window position, so a window can be restored to both its
original position and size, rather than defaults
* Changes initial window position from undefined to centered, it caused
some problems with window positioning returning from fullscreen mode
This was SVN commit r15827.
The main problem was that GC was only called from the simulation before
this patch. This means when you were waiting in the multiplayer lobby or
just had the GUI open, it only called GC when getting close to the JS
runtime size limit (I assume). Another problem was the Net Server
runtime which didn't GC either. Here the runtime size limit is 16 MB
though, so it's not too terrible. These issues have both been addressed
and GC has been given a bit more time per incremental slice to make sure
it gets done in time. It's still far from perfect, but there are too
many changes in SpiderMonkey related to GC, so I don't want to spend too
much time on this yet.
Refs #2808
This was SVN commit r15787.
Implements SDL2 text editing handler for input fields, this is for IME
support, so users entering CJK text can see what they're composing
before committing it. Should have no effect on SDL1 or normal text
input.
This was SVN commit r15785.
* Adds SDL color cursor implementation
* Adds config option for choosing preferred display in multimonitor
setup
* Uses text input API to better handle CJK input
* Fixes various hotkey and input bugs
SDL 1.2 is still the default and recommended, to test experimental SDL2
support, pass the --sdl2 flag to update-workspaces
This was SVN commit r15767.
Cleans up some of the autostart logic, removes and renames a few options
for clarity.
Updates readme.txt to reflect these changes and include some examples
This was SVN commit r15761.
* separate the HTTP profiling server from the on-screen profiler
* allow shutting down the HTTP profiler
* print messages when enabling/disabling HTTP and GPU profilers
Patch by kingbasil, fixes#1862
This was SVN commit r15723.
Mount public in case we are starting Atlas and no mods are specified in
the config.
If users remove all mods and save this to the config and try to start
Atlas it will
crash, as it cannot find some needed files.
This was SVN commit r15678.
To achieve this, mirage entities are created per player, to replace the
real entities when these ones fall into the fog-of-war. These mirage
entities are created on-the-fly, and destroyed when they get back in
sight.
This depends heavily on the VisibilityChanged message added in
2174eaaeee.
As a temporary adjustment, territories do not explore the map anymore
when their borders change. See #2709.
Fixes#599
This was SVN commit r15612.
The ScriptInterface pointer can be NULL there, so using it without
checking is not safe.
This fixes the problem by continuing with the exact stack rooting
changes, which makes the temporary solution unnecessary.
Fixes#2707
Refs #2415
This was SVN commit r15611.
I had to change a few other functions to take JS::MutableHandleValue
because JS::Stringify takes a JS::MutableHandleValue as input parameter.
That seems a bit strange because it should not change that value.
I assume it has historical reasons.
Refs #2415
Refs #2462
This was SVN commit r15605.
Changes CallFunction and CallFunctionVoid to use a HandleValue as object
parameter. Also changes some JS serialization/deserialization functions
to only support the JSAPI rooted types (drop support for CScriptVal and
CScriptValRooted there). Some other functions got changed too because
they were closely related.
Refs #2415
Refs #2462
This was SVN commit r15592.
* CGameLoader created a new JS::Value when assigning to m_Metadata.
This means it didn't actually update metadata in SavedGames::Load. The
new approach solves this problem and should work well if
CScriptValRooted gets replaced in the future.
* The cloning in ScriptFunctions.cpp was required. Removing it caused
compartment mismatches.
* Now CGameLoader loads the metadata unconditinally because we didn't
actually use the option to not load load it.
Ref #2415
This was SVN commit r15589.
Changes GetProperty, SetProperty and HasProperty and a few other
functions to take handles. The conversions to CScriptVal or
CScriptValRooted at some places should be removed in the future. I've
done that to avoid an even larger patch.
Refs #2415
Refs #2462
This was SVN commit r15568.
Also includes one little "demo-usecase", but additional code will be
changed to use that in future commits.
Refs #2415
Refs #2462
This was SVN commit r15542.
JS::MutableHandleValue is similar to JS::HandleValue, but the whole
JS::Value it points to can be replaced.
This change is needed for support of exact stack rooting and moving GC.
Contains a few other trivial API adjustments and style improvements too.
Refs #2462
Refs #2415
This was SVN commit r15534.
Change the shader itself so that the effects look nicer and are more
consistent across settings.
Rework the water mesh generation (simpler system). Fix a few issues.
May work oddly with Atlas since I haven't been able to compile yet.
Refs #1875 (maybe fix), Fixes#2077 (I'll assume it does), Fixes#2114
(assumption again), refs #48.
This was SVN commit r15473.
This way we do not have two error messages when starting Atlas, but the
dynamic Atlas lib is not available.
Patch by Gallaecio. Fixes#1540.
This was SVN commit r15301.
BoundingSphere is similar to a bounding box, but more spherical.
SOverlaySphere is useful for visualising BoundingSphere (it's quite
inefficient and should only be used for debug functionality).
Normalise the camera frustum clipping planes, so that IsSphereVisible
gives the correct result.
This was SVN commit r15261.
• You can now translate “The production queue is full”.
• Internationalized the “Pause” and “Resume” buttons. Only the initial
label was internationalized, it would switch to English as soon as you
pause the game for the first time.
• Internationalized the “Screenshot written to” message in the engine.
This was SVN commit r14968.
Provides the logic to detect the system language, load translations, and
use
loaded translations both in the C++ and the JavaScript side.
This patch includes code by Yves, sanderd17, leper, historic_bruno and
Gallaecio. It’s worth noting that Yves and historic_bruno were also the
main
contributors behind the changes in 1b3261b8f4 as well.
This was SVN commit r14953.
This commit contains all the required changes to our source files and
build scripts (hopefully).
A next commit will remove the old stuff of SpiderMonkey 1.8.5.
Spcial thanks to:
- H4writer who helped a lot mainly with the performance issues we
had/have, but also with other problems or questions.
- Leper for the review.
- Historic_bruno for implementing the build scripts on Mac OS X and
testing on the Mac.
- The people from the #jsapi channel and from
mozilla.dev.tech.js-engine who answered a lot of questions and helped
solving problems.
- All the other people who helped
Refs #1886Fixes#2442Fixes#2416
This was SVN commit r14877.
This problems occurs with the new SpiderMonkey in debug mode, but it's
not a SpiderMonkey issue.
Unfortunately I couldn't find a clean solution, so I just documented the
problem in an extensive comment block and applied a workaround.
A clean solution would probably require changing the approach for
counting allocations completely.
This was SVN commit r14874.
Remove waves for now as they were unsatisfactory.
Removes "shininess" as a water parameter as it was basically useless.
Add a button in Atlas to recompute water parameters so you can now see
fog in Atlas.
Fixes#1743, #1803 (invalid)
Refs #1875, #2114, #48.
This was SVN commit r14514.
It's completely broken since 4b1297b328 and will have to be updated for
the new SpiderMonkey API.
I only uncomment it at the moment because I plan to fix/reimplement it
soon after the upgrade.
Closes#2348
Refs #2241
Refs #1886
This was SVN commit r14506.
Each GUI Page gets its own compartment and all ScriptInterfaces in the
same thread should now use the same JS Runtime.
This is required for the SpiderMonkey upgrade.
Check the ticket for details.
Closes#2241
Refs #1886
Refs #1966
This was SVN commit r14496.
Replace CreateValue with SetValueString so we don't pass pointers to
internal
ConfigDB structures around. Refs #1810.
Remove some splash screen related functions since we can achieve the
same
with the ConfigDB functions exposed to scripts.
This was SVN commit r14437.
This approach isn't used anymore. Now we start the archive building with
parameters to pyrogeneis.
Refs #2241 (the code used g_ScriptingHost which is going to be removed)
This was SVN commit r14102.
SDL queues up all the input events received in a frame. When the hotkey
system saw a key up/down event, it immediately updated its
HotkeyIsPressed state and then pushed a hotkey event onto the end of the
queue.
If the initial queue was e.g. [key-down shift, key-press Z, key-up
shift], the hotkey event triggered by Z would be processed after the
key-up shift had updated the HotkeyIsPressed state, so the handler of
the Z hotkey would not think the shift hotkey was pressed.
If the initial queue was e.g. [key-press Z, mouse-click], the hotkey
triggered by Z would be processed after the mouse-click event, so it
could apply to the wrong building selection.
Fix by pushing the hotkey events onto a special queue that gets
processed before any subsequent SDL input events.
Also update the HotkeyIsPressed status when the HOTKEYDOWN/HOTKEYUP
events are processed, not when they are generated, to guarantee they are
consistent with the DOWN/UP events.
Fixes#1869.
This was SVN commit r14057.
Because it was historically grown, we have some duplicated code for
converting script types to native types.
This patch removes the file JSConversions.cpp and moves some code to
ScriptConversions.cpp.
The places using JSConversions.cpp are changed to use the
ScriptInterface's conversion functions in ScriptConversions.cpp.
I also removed JSInterface_Vector3D because it had additional
requirements to the conversion code that no other code has and because
it's currently not used. I think it doesn't make sense to maintain code
just because it could possibly be used again later.
Closes#2213
Refs #1886
This was SVN commit r14036.
Replace unifont with CFont and CFontManager, since the h_mgr interface
was
needlessly inconvenient.
Load the font textures through CTextureManager, to support dynamic
reloading (e.g. when resetting GL state - see #741).
Add CFontMetrics as a convenient wrapper for code that just wants to
measure text.
Fixes#1117.
This was SVN commit r14016.
Implements custom, VFS-based map load/save dialogs for Atlas (replaces
broken native file dialogs), fixes#631, #889.
Fixes map loading/saving to handle arbitrary subdirectories for better
organization.
Adds default settings to Atlas player panel, fixes#1872. Each setting
now has a checkbox to choose whether it should be saved with the map
(avoids writing lots of useless default data for each map).
Adds map preview setting to Atlas, refs #1745.
Cleans up and simplifies some duplicate code.
Fixes optional serialization performance test.
This was SVN commit r13938.
wdbg_heap_NumberOfAllocations doesn't work without the wdbg_heap
leak detector, which is disabled since it's slow and broken.
Use a simple hook via _CrtSetAllocHook instead to count allocations.
This was SVN commit r13910.
Switch all the constant strings in graphics code to use the new
variables.
This avoids the cost of instantiating CStrInterns at runtime every
frame.
This was SVN commit r13906.
Adds INIT_HAVE_DISPLAY_ERROR init flag to correctly override
ah_display_error in Atlas (InitVfs was overriding it again), but don't
use it because it's ugly and broken, refs #1729
This was SVN commit r13724.
Put the AI memory heap back to 32 MB to avoid OOM errors with numerous
AIs in late game.
Fix a bug that made ProductionQueue not broadcast progress.
Fix many issues with Aegis in defense, pathfinding, foundation
construction, training building choice, strength calculations, building
placement and mostly attack. Aegis should be much more aggressive.
This was SVN commit r13247.
Fixes inconsistency between Atlas and in-game particle rendering during
pauses.
Fixes some issues related to Atlas simulation test and map loading.
This was SVN commit r13184.
Throw a warning if a invalid (not present) AI is specified in a map.
Replace the last occurences of jubot with qbot.
Exclude the common siege templates from the Units Demo map.
Fix an error with flying units.
Replace CFG_GET_SYS_VAL with CFG_GET_USER_VAL and rename it to
CFG_GET_VAL to reflect its behaviour better.
Fix linker error with clang 3.2. Refs 1588.
Remove some useless includes.
This was SVN commit r13031.
Fixes sound system to work with archives (use VFS files instead of
POSIX), fixes#1604.
Improves error handling and logging, refs #1594.
Allows sound to be disabled with -nosound/-quickstart runtime options or
--without-audio build option, fixes#1609, #1614.
Experimentally increases default buffer size to help prevent sound
stoppages.
This was SVN commit r12566.
Backport os_getversion from premake4.4-beta4 and extend it to support
POSIX-compilant systems.
Add some missing newlines at the end of file as these cause warnings on
OpenBSD.
Update the config paths.
This was SVN commit r11970.
Let materials specify shader uniform values.
Use interned strings for shader uniform/attribute names.
Remove confusing float* cast operator on CVector4D.
Simplify and clean up CVector4D.
Remove non-supported 'old' lighting model.
This was SVN commit r11453.
Support conditional expressions in shader effect XML files.
Consolidate fixed-function model rendering into the shader system.
Remove lots of now-obsolete renderer code.
Move shader defines from std::map to new class with interned data, for
performance.
Move texture from model into material.
Alleviate singletonitis.
Remove obsolete lodbias setting.
Remove unused terrain shadow transparency.
This was SVN commit r11423.
Adds saved game directory to the hotload watch list.
Logs error instead of crashing when saved game is not found.
Changes Atlas double-click selection to only pick units from the same
player.
This was SVN commit r11332.
Makes all actors selectable in Atlas and gives them selection rings (an
EditorOnly flag is used in the template for Atlas-only selectables).
Adds player colors to Atlas selection rings.
Fixes decal selection by falling back to old-style AABBs. Refs #1032.
Replaces UnitManager selections with EntitySelection helpers.
Adds DrawOverlays to Atlas views, for Atlas-specific rendering.
Fixes bug where selection rings conflicted with Move/rotate tool in
Atlas simulation test.
This was SVN commit r11177.
