- Removed obsolete C++-side `addPlayer`, introduced in 4fed9b8242, moved
out of Atlas in 1c0536bf08, unused after 9ee44bd9b8.
- Get the player settings from a local function (avoids passing
arguments).
- Removed setting the standard diplomacy (done in cmpPlayerManager since
132020f88e).
- Create entity when adding a player instead of creating it and
instructing the playermanager to add it.
- Changed/Removed some comments.
Differential revision: https://code.wildfiregames.com/D4482
Comments by: @Stan
This was SVN commit r26404.
Since the players/civs already have cmpIdentity, use it.
This forces civs to have corresponding XML in the `special/players/`
folder.
Also moves the files from `special/player/` to `special/players/`
consistent with other folders. And moves the generic `player.xml` one
level up.
Differential revision: https://code.wildfiregames.com/D4473
Help and comments by: @Stan, @wraitii
This was SVN commit r26298.
This makes it possible to make units heavier, which both push more & get
pushed less by other units.
In particular, the diff does it for siege units & elephants.
This improves movement for these units in crowd situation, since they
will now basically not move when other regular units push into them.
Supported By: asterix, marder
Refs #6127
Differential Revision: https://code.wildfiregames.com/D4452
This was SVN commit r26275.
This is a paradigm change for AI computation.
Historically, the AI was intended to be run in a separate thread from
the simulation. The idea was that slow AI wouldn't stop the renderer
from being smooth.
In that original design, the AI received a copy of the game world and
used that to run its logic. This meant the simulation could safely do
whatever it wanted in the meantime. This copy was done via AIProxy &
AIInterface.
This design ended up having significant flaws:
- The copying impacts the simulation negatively, particularly because
AIProxy subscribes to a lot of messages (sometimes sent exclusively to
it). This time cannot be threaded, and impacts MP games without AIs.
- Copying the data is increasingly difficult. Modifiers are a headache,
LOS is not implemented. Lots of logic is duplicated.
The intended benefits of the design also failed to realise somewhat:
- The AI was never threaded, and in fact, it is probably better to try
and thread Sim + AI from the renderer than just the AI, at which point
threading the AI specifically brings little benefit.
The new design is much simpler and straighforward, but this has some
side-effects:
- The AI can now change the simulation. This can be used for cheating,
or possibly for a tutorial AI.
- The AI runs in the same GC zone as the simulation, which may lead to
more frequent Sim GCs (but overall we might expect a reduction in
temporary objects).
- The AI state was essentially cached, so replacing some functions with
Engine.QueryInterface might be slower. The tradeoff should be balanced
by lower AIProxy computation times.
Future work:
- Threading some specific AI tasks could still be worthwhile, but should
be done in specific worker threads, allowed to run over several turns if
needed.
Technical note: the AI 'global' is in its own Realm, which means name
collisions with the same are not possible.
Other notes:
- The RL Interface uses the AI Interface and thus will gradually lose
some data there. Given that the RL Interface can now request data
however, this should be dine.
Refs #5962, #2370
Differential Revision: https://code.wildfiregames.com/D3769
This was SVN commit r26274.
The UnitManager already lists all units, so we do not need to go through
the visual actor of entities to update them. This is faster and
decouples simulation & graphics code slightly.
Further, the simulation does not need to know about texture changes (see
also 410d2e883a), so remove those calls in Atlas.
Differential Revision: https://code.wildfiregames.com/D4455
This was SVN commit r26270.
6581796103 removed the ability for terrain to affect movement speed. The
JPS pathfinder cannot support it, and the approach was poor anyways,
coupling rendering data with simulation data.
This lets us remove the dependency on CTerrainTextureManager everywhere.
Tested by: langbart
Differential Revision: https://code.wildfiregames.com/D4459
This was SVN commit r26269.
The main change is the introduction of a 'pushing pressure' counter on
units. This counter increases when units get pushed around, and
decreases over time. In essence, units under high pressure move slower &
are harder to push around.
The major effect is that units can now get bogged down when very dense
groups start colliding. This makes movement more realistic, makes unit
movement more 'chokepointy', and generally improves the mathematical
soundness of the system (lower values are easier to handle for our 200ms
turns).
Other changes:
- The logic to detect units crossing each other's path has been
reworked. Units that run towards each other should not more obviously
avoid each other.
- New parameters: 'Spread' is a measure of how strong the pushing effect
is based on distance. With the current settings, static-pushing is
rather 'on/off', whereas moving-pushing is more gradual (and thus the
max influence distance was increased when moving).
- Default values have been tweaked for lower overlap.
- Units only looked at other units within their grid region. This led to
overlap near grid-borders. Units now look at neighboring grid elements,
which largely removes this issue. While this may be slower, the
performance of pushing was largely negligible before, so it is unlikely
to become a main cause of lag (and overlap was generally disliked by
players).
- Units no longer orient in the direction of pushing, but instead keep
facing their target. This can look slightly odd under very heavy pushing
forces, but vastly improves behaviour of very slow units such as rams
(since they spend much less time turning around). As a side-effect,
clean up angle code following acc780bcbb .
Engine changes:
- Add a debug rendering mode at compile-time to help understand what is
happening.
- Make it possible to constexpr initialise fractional fixed numbers by
using FromFraction
The 'pressure' change was inspired by alre's suggestion at
https://wildfiregames.com/forum/topic/56436-for-a-better-unit-movement/#comment-461987
Refs #6127
Differential Revision: https://code.wildfiregames.com/D4439
This was SVN commit r26245.
If a *nix user wishes to build `pyrogenesis` with support for Valgrind
(such as
it is), then can do so by passing `--with-valgrind` to
`update-workspaces.sh`.
(They will need Valgrind installed and locateable via `pkg-config`.)
Reviewed By: sera, Stan
Fixes: #2904
Differential Revision: https://code.wildfiregames.com/D3646
This was SVN commit r25933.
Bug introduced in 76acc4e146.
The previous CUnit code had logic to select random aesthetic variants
once initially. The new code removed that, as I completely missed its
purpose, assuming that the random selection, being based on a seed,
would pick the same variants every time. This is incorrect because
entity selections can change the RNG calls, thus the variants, and thus
entity appearance can change when the animation changes (typically, a
horse will change color when walking and running).
The solution is to re-introduce the choice of actor selections on CUnit
creation. This makes sure that units don't change their purely-aesthetic
selections when e.g. animations change.
Reported by: Wowgetoffyourcellphone
Tested By: Stan
Differential Revision: https://code.wildfiregames.com/D4205
This was SVN commit r25844.
I think there is a small mismatch between CheckMovement & the vertex
pathfinder when computing passability because one is ray-based and the
other just uses edges. However, it's out of my reach to fix it for now.
This can lead to units being stuck near building edges occasionally.
This introduces an un-intrusive recovery strategy (aka a hack) in
HandleObstructedMove that should get the units unstuck.
Should fix#6114 (to a sufficient extent anyways)
Differential Revision: https://code.wildfiregames.com/D4162
This was SVN commit r25786.
Following 40cbde1925, the minimum pushing force is 0.2. This also
happens to be the maximum pushing force any pair of units can exert on
each other, so they can freely overlap instead of being pushed.
This tweaks settings slightly to fix that problem.
Reported by: marder
Differential Revision: https://code.wildfiregames.com/D4129
This was SVN commit r25748.
Introduced in 40cbde1925
MoveToFormationOffset may be called after the formation controller is
reset, leading to issues. It seems best to trust only
SetMemberOfFormation.
This causes the speed glitch experienced by wow & Valihrant.
Differential Revision: https://code.wildfiregames.com/D4128
This was SVN commit r25747.
As no default values got set, some game settings became NaN, which
triggered exceptions.
This sets sane default.
This also includes better debugging logic in case of exception, so it's
easier to know what happens.
Fixes#6200
Reported by: langbart
Differential Revision: https://code.wildfiregames.com/D4113
This was SVN commit r25736.
This overall decreases the deathball effect from units walking to each
other a bit.
- Fix formations - this cleans up a UnitMotion hack for formations,
making it possible to increase pushing ranges without breaking closely
knit formations like testudo.
- Make MINIMAL_PUSHING and the MOVE_EXTENSION configurable, and add a
STATIC_EXTENSION as well.
- Increase the pushing range significantly, making units sparser.
Differential Revision: https://code.wildfiregames.com/D4098
This was SVN commit r25708.
Fixes 592453c62f
wasObstructed and wentStraight are not reset when Move() isn't called,
but PostMove may still be called (if the unit was pushed). This will
OOS.
Differential Revision: https://code.wildfiregames.com/D4088
This was SVN commit r25686.
The pathfinder computations are run asynchronously (and potentially on
the main thread) in-between simulation turns, thus reducing
pathfinder-related lag considerably in common cases.
To make this most efficient, the number of paths computed during a turn
via MaxSameTurnMoves is reduced from 64 to 20.
This has a hard dependency on the obstruction manager (via the vertex
pathfinder) not being modified in-between simulation turn (or to put it
more generally on the simulation state not changing outside of turn
computation), otherwise results will be non-deterministic and go OOS.
This is currently entirely safe (as in, it indeed does not happen that
the simulation state changes in-between turn), but future work towards
improving simulation sandboxing would be good.
Thanks to Kuba386 for maintaining & improving the patch in 2020
Thanks to everyone who tested the various iterations of this patch.
Fixes#4324
Differential Revision: https://code.wildfiregames.com/D14
This was SVN commit r25657.
Reduces the 'clumpiness' of units, particularly when ordered to move to
a single point. The minimum pushing force was increased to compensate.
Differential Revision: https://code.wildfiregames.com/D3978
This was SVN commit r25479.
This makes incremental recompilation faster when changing static
interned strings.
Differential Revision: https://code.wildfiregames.com/D3975
This was SVN commit r25457.
ScriptComponent does not use ComponentManager, and its derived classes
(most ICMP*.cpp files) do not either. Therefore, we can skip a lot of
transitive inclusions and speed up recompiling by not including it
there.
Differential Revision: https://code.wildfiregames.com/D3962
This was SVN commit r25447.
This removes usage of CmptPrivate outside of ScriptInterface.
ScriptRequest can now be used to safely recover the scriptInterface from
a JSContext instead of going through ScriptInterface, which allows more
code cleanup.
Follows 34b1920e7b
Differential Revision: https://code.wildfiregames.com/D3963
This was SVN commit r25442.
Follows 34b1920e7b.
JSON functions and ToString are movec to their own headers.
Also clean out a few PersistentRooted usage to use the 2-phase init to
clean up scriptInterface usage.
With these functions split off, we can finally clean out headers and
remove ScriptInterface.h from most of them, in favour of smaller and
more precise headers.
Take the opportunity to clarify some comments regarding Mutability.
Differential Revision: https://code.wildfiregames.com/D3961
This was SVN commit r25434.
Follows 34b1920e7b.
This splits off the object-related functions, such as
[Set/Get/Has]Property, CreateObject, CreateArray, FreezeObject.
It also puts the definitions in the header itself, which might end up
with faster code here & there, though perhaps slower compilation time
(somewhat doubtful since we already included most things anyways).
Differential Revision: https://code.wildfiregames.com/D3956
This was SVN commit r25430.
All ToJSVal/FromJSVal definitions are put in a separate header.
Remove AssignOr[To/From]JSVal duplication.
The functions were already static so this is rather straightforward.
Follows 34b1920e7b and 2bae30c454
Differential Revision: https://code.wildfiregames.com/D3953
This was SVN commit r25428.
Follows 34b1920e7b.
This separates StructuredClone & DeepCopy logic into its own header,
reducing the size of the monolithic ScriptInterface header.
Differential Revision: https://code.wildfiregames.com/D3922
This was SVN commit r25419.
XMB format is bumped to 4, invalidating all cached files. The
differences are:
- element/attribute names are stored after the elements themselves, and
not before. This allows writing XMB data in one pass instead of two.
- names themselves becomes offsets (instead of arbitrary integers),
making getting the string from the int name much more efficient.
XMBFile is renamed to XMBData to clarify that it does not, in fact,
refer to a file on disk.
XMBData::GetElementString is also changed to return a const char*, thus
not creating an std::string. A string_view version is added where
convenient.
The XML->XMB and JS->XMB conversion functions and the corresponding
storage are moved to `ps/XMB`, since that format doesn't particularly
relate to XML. CXeromyces becomes lighter and more focused as a result.
The XML->XMB conversion also benefits from the above streamlining.
Note that in a few cases, string_view gets printed to CLogger via
data(), which is generally not legal, but we know that the strings are
null-terminated here. Our libfmt (version 4) doesn't support
string_view, that would be v5.
Differential Revision: https://code.wildfiregames.com/D3909
This was SVN commit r25375.
We often only need to include ScriptRequest.h and not the full
ScriptInterface.h
Differential Revision: https://code.wildfiregames.com/D3920
This was SVN commit r25366.
TERRAIN_TILE_SIZE is now only used in relevant places in the simulation.
This also makes it mostly possible to use CFixed in constexpr contexts.
Refs #5566
Differential Revision: https://code.wildfiregames.com/D3078
This was SVN commit r25360.
